LightingPorsche

LED Tail Lights for Porsche 997 991 (05-09) and DIY How To Install

The 2005, 2006, 2007, 2008 and 2009 Porsche 997 991 is arguably one of the best road cars. These cars are known for their direct driving characteristics, incredible road handling and all around performance, especially in trims such as the GT3, GT3 RS and Turbo.

In order to keep this modern classic looking, well, modern, we highly recommend upgrading the tail lights to a clean and updated look with LED lights such as these Spec-D Porsche 911 997 LED Clear / Red / Smoked Tail Lights that are a direct replacement and really give your car a fresh updated look.

Above: Smoked Version

These aftermarket LED tail lights have modern features such as a LED DRL Strip, LED brake lights, LED turn signal bulbs, LED reverse lights and a fiber optic LED parking light.

Full fitment information:

  • 2005, 2006, 2007, 2008 Porsche 911 (997) Carrera / Carrera 4 / Carrera S / Carrera 4S / Targa 4 / Targa 4S
  • 2007, 2008, 2009 Porsche 911 (997) GT3 / GT3 RS / Turbo / Turbo S / GT2 (Coupe & Convertible model)

Check out the video above that shows you how to do a DIY install on these tail lights into your own 997 Porsche. We run you through the step by step process from removing your factory stock lights to installing the Spec-D LED Tail Lights in their place.

In addition, the video also shows how the lights look when they are lit up. We have them available in various styles and you can see the various styles below:

Clear LED Tail Lights
Red LED Tail Lights
Smoked LED Tail Lights
Red Smoked LED Tail Lights
Black Matte LED Tail Lights

For more information on these lights, check out our listing to order yours:

LED Tail Lights 997 991 Porsche

If you have any questions on the install after watching our video above, or have any questions at all on these lights, leave your question in the comments below or send us an email from our store contact us page.

You may also like

2 Comments

  1. Installed these lights but get an error code “Check reversing lights”. Replacing the factory lights back in removes the error.

    Possibly the resistance of the reversing lights is off?

    1. I too have an error code but for the turn signals on a 997.1 turbo..
      Does anyone know which color wire is for the turn signals and what resistors I would need?

Leave a Reply

More in Lighting